Buck Stove - Model 21 Wood Burning Stove
Best Bang For Your Buck If Square Footage Is Your Main Concern
Compare All Buck Stove Models With Our Table At The End
Who Is This Stove For?
1) People Looking to heat up to 1,800 square feet. When coupled the blower for optimal heat circulation and the ability to produce up to 28,901 BTUs per hour, you have a stove with a 70% efficiency. Which is pretty amazing for a non-catalytic stove. All Of that for a base price of $1,900 is unheard of.
2) Interested in the versatility of a stove that can function as a masonry fireplace insert or as a standalone unit
3) Needed The Best Value Wood Burning Stove For Your Mobile Home. The Model 21 is approved to be installed in all Mobile. homes
Features of The Model 21
- Size: 22 Inches
- Color: Black
- Product Dimensions: 22" W x 20 1/4" H x 18 1/8" D
- Non-catalytic
- 1.6 cubic foot firebox
- Freestanding wood stove
- 70% overall efficiency rating
- Easy operation and low maintenance
- Three design options to choose from
- Approved for use in prefab and mobile homes
- Accommodates 11" logs front to back or 18" side to side
- 5 Year Warranty
You may qualify for a 30% tax credit from 2023 - 2032 for the purchase and installation of this unit.
Technical Specs
Technical Performance Details
*For peak performance, Buck Stove recommends burning your wood in a front to back placement on all Buck Stove wood burning units *The heating capacity and BTU output of any Buck Stove will vary depending upon the following factors: ceiling height, shape of dwelling, insulation in dwelling, type and moisture content of wood being burned and whether the model has a blower. Stone fireplaces, large flues, double flues & fireplaces with existing ash dump may require optional direct connect kits. See dealer for details. All Buck Wood Stoves, fireplace inserts and freestanding stoves are tested and listed to UL Standards by PFS.
Proudly Sources All Materials In The USA
Catalytic Stoves Vs Non-Catalytic Stoves
Normal rule is, for a primary heat source, choose the catalytic unit. For supplemental heating, choose the non-cat unit. Catalytic units have efficiency rating of 72%. There is more maintenance with a catalytic unit. At some point, depending on how you operate the unit and the type of wood burned, you will probably need to replace the catalyst. Non-catalytic units have an average efficiency rating of 63%, which is quite high for a wood burning unit. There is not a big price difference between catalytic and non-cat stoves.
Comparison of All Buck Stove Models
|
Stove
|
Insertable
|
Free Standing
|
BTU/H
|
Efficiency
|
Sq Ft
|
Catalytic
|
Base Price
|
|
Model 21NC
|
Yes
|
Yes
|
11,079 - 28,901
|
70%
|
800 to 1,800
|
No
|
$1,950
|
|
Model 74
|
Yes
|
Yes
|
13,300 - 52,400
|
73%
|
1500 to 2600
|
No
|
$2,694
|
|
Model 81
|
Yes
|
Yes
|
13,800 - 59,500
|
69.8%
|
1,600 to 2,700
|
No
|
$3,269
|
|
Model 91
|
Yes
|
Yes
|
10.400 - 62.745
|
80.4%
|
1,800 to 3,200
|
Yes
|
$3,602
|
|
Model ZC74
|
Yes
|
No
|
13,300 - 52,400
|
73%
|
1,500 to 2,600
|
Yes
|
$3,708
|
|
Model ZC21
|
Yes
|
No
|
13,300 - 52,400
|
70%
|
1,500 to 2,600
|
No
|
$3,006
|
|
Homesteader
|
No
|
Yes
|
11,079 - 28,901
|
N/A
|
800 to 1,800
|
No
|
$3,799
|
|
Camp Stove
|
No
|
Yes
|
N/A
|
N/A
|
N/A
|
No
|
$299
|
Best Bang For Your Buck If Your Main Concern is Efficiency & Sq Footage Per Dollar
Best Bang For Your Buck If Your Main Concern Is BTU/HR
Frequently Asked Questions
I have a catalytic combustor in my wood stove. Can I clean it & how often does this need to be done?
After the first burning, the combustor should have a light gray powder-like appearance. Should the combustor’s cells become masked with fly-ash, use a paintbrush or soft-bristle brush and dust the combustor gently. Never use anything abrasive to clean the combustor. A vacuum cleaner may be used, but never use high-pressured air to blow the cells free of any build-up. Any cell blockage can be removed with the use of a pipe cleaner or cotton swab. Should the combustor become masked with soot or creosote, it is possible to burn the accumulation off by opening the by-pass and building a hot fire. Once the hot fire is created, close the by-pass halfway and burn for 30-60 minutes with the bypass in this position. Applied Ceramics suggests checking and cleaning the combustor before each burning season begins, if necessary.
How do I know if my catalytic combustor needs to be replaced?
The catalytic combustor has a six-year life expectancy when used according to the stove owner’s manual. Although, some combustors have operated with efficiency for as high as ten years, the combustor’s life is based on the stove operator, maintenance, fuels used, and the stove manufacturer’s design.
My glass has a black film on it. How can I clean it?
You can clean your glass by using an oven cleaner and paper towels or razor blade. You can also make a solution of vinegar and water.
I would like to replace the gasket around my door. What do I need?
Depending on your model, you need door roping and/or ash bar wicking. You will also need a 2.8 oz. tube of high temperature silicone.
I have an older Buck Stove and I would like to convert it to a freestanding stove. Is this possible?
Yes, it is possible. You will need a stack and a pedestal to do so. First, you must determine which model you have. To do so, measure the rectangular opening on the top of the unit. If the opening is 13¾” x 3¼,” you have either a Model 26000 Old Buck (Little) or a Model 27000 Old Buck (Regular). Order part # FA 260421 for the stack and part # FA P4171B for the pedestal. If the opening measures 16” x 3¾,” then you have Model 28000 Old Buck (Big). Order part # FA 280421 for the stack and part # FA P4171B for the pedestal.
I have a Buck Stove with a 3-speed thermostat. It only works on high. Can it be it 3 speeds again?
After the first burning, the combustor should have a light gray powder-like appearance. Should the combustor’s cells become masked with fly-ash, use a paintbrush or soft-bristle brush and dust the combustor gently. Never use anything abrasive to clean the combustor. A vacuum cleaner may be used, but never use high-pressured air to blow the cells free of any build-up. Any cell blockage can be removed with the use of a pipe cleaner or cotton swab. Should the combustor become masked with soot or creosote, it is possible to burn the accumulation off by opening the by-pass and building a hot fire. Once the hot fire is created, close the by-pass halfway and burn for 30-60 minutes with the bypass in this position. Applied Ceramics suggests checking and cleaning the combustor before each burning season begins, if necessary.
I have a wood stove and want to make it gas. Can I do this?
No, we do not recommend doing this. If you changed from wood to gas, it would not only void the warranty of the gas log set, but you run the risk of damaging gas components in the log set itself and damaging your home.
My wood stove has developed a crack in the top. Can this be repaired?
Yes, it can be fixed. Buck Stove repairs units during the summer months. Please email us at info@ourhomesteading or call us at (828) 765-6144 for further directions.
Regarding gas valves, what is the difference between a Millivolt and Modulating unit?
A Millivolt unit has the capability of using a remote control or wall thermostat to regulate the temperature setting. Whereas, the temperature of a modulating unit is controlled by changing the knob setting on the unit itself.
Expert Project Support
As proud authorized dealers of products to bring you closer to your friends, family and land we we are constantly looking for ways to support your dream.
Whether you are trying to create the perfect family space to entertain guests or delving trying to weigh the cost of maintenance, with heating, comparing wood-stoves to pellet stoves: the best price and the best advice will always be available when you contact us directly through our website, email or phone.
We look forward to serving you
